PULOX2000 Properties

  1. Operation of the pulse oximeter is simple and convenient.
  2. The Spo2 device is compact and ultra light (total weight is about 50g including battery) and conveniently carried.
  3. 24 hour data storage and USB transmission allow data monitoring by the included PC software.
  4. Economic power consumption (the lithium battery can be operated continuously for 12 hours).
  5. Low voltage warning will be indicated in the visual display when battery voltage is low.
  6. The product will automatically be powered off when out of use for longer than 5 seconds.
  7. The PULOX2000 implements a Spot Oxygen Saturation (SPO2) method - SPO2 means, that the oxygen saturation levels are being measured repeatedly, every few milliseconds.
    Each measure gives a Spot-like image of current oxygen saturation level.

    Measurement Performance in Weak Filling Condition:
    required the test equipment (BIO-TEK INDEX Pulse Oximeter tester) the pulse wave is available without failure when the simulation pulse wave amplitude is at ±4%.

    Interference Resistance Capacity against Ambient Light: Device works normally despite mixed noise produced by BIO-TEK INDEX Pulse Oximeter tester.
    The Spo2 device equipped with a function switch, through which the Oximeter can be powered off if the device is not in use for longer than 5 seconds.

    Operation Instructions

    1. spread the clamp.
    2. Place one finger in the Oximeter (it is best to plug the finger thoroughly) then release the clamp.
    3. Press the switch button once on front panel.

    Note: PULOX2000 is equipped with a rechargeable lithium battery - make sure that the battery is charged before use.


Specifications

  1. SpO2 & pulse monitoring, histogram & bar graph display of pulse rate.
  2. 24 hour data storage.
  3. USB data transmission (a CD containing a PC software and USB driver is included).
  4. LCD graphic display with back light.
  5. Multi-direction display (4 modes).
  6. Color Display.
  7. 4 levels on brightness.
  8. Easy to use &high accuracy and repetition.
  9. Automatic power-off after 5 seconds of idle signal.
  10. Light weight (50g), battery included, small size, portable.
  11. Long time continuous use (12 h) with a rechargeable lithium battery.
  12. Low voltage alarm display.

PULOX2000 Operation Scope

The fingertip Oximeter can be used to measure human Hemoglobin Saturation and heart rate through the fingertip.
The product is suitable for home use. Medical - clinical, Anesthesia, pediatrics, intensive care, physical care in sports etc.
The product is not suitable to monitor patients continuously.

The PULOX2000 implements a Spot Oxygen Saturation (SPO2) method - SPO2 means, that the oxygen saturation levels are being measured repeatedly, every few milliseconds. Each measure gives a Spot-like image of current oxygen saturation level.

Portable, Reliable & Wireless Pulse Oximeter
2P-Oximeter's new PULOX2000 is an accurate, light weight & affordable pulse oximeter designed for on-the-go spot checking of the saturation of hemoglobin with oxygen–available now.

F.A.Q

Answers

  • What is pulse oximetry?
    Pulse oximetry is a useful method of monitoring patients in many circumstances, and in the face of limited resources, the pulse oximeter may represent a wise choice of monitor, as with training it allows for the assessment of several different patient parameters.

  • What is SpO2?
    SpO2 means, that the oxygen saturation levels are being measured repeatedly, every few milliseconds.
    Each measure gives a Spot-like image of current oxygen saturation level.



  • How does the PULOX2000 operate?
    The Oximeter works according to Lambert Beer Law: The PULOX2000 omits a near-infrared pulse (a 660nm ray and 940nm near-infrared ray). The light passes through the skin, "hits" red blood cells, and is partially absorbed. The part which isn't absorbed is picked up by the photoelectric sensor, and being analyzed. The analysis is calculated according to the hemoglobin (R Hb) and Oxyhemoglobin (02 Hb) reflectance factor. Reflectance factor, is an index that shows the exact amount and length of light that a substance will absorb, when it is being "hit" by a certain wavelength of light.

  • What is the normal range for each PULOX2000 pulse oximeter display?
    Individual normal range should be defined by your physician.

  • Can I put it on wet (or bloody) finger?
    No. This model is not water resistant, and exposure to excessive moisture will damage the device and void the warranty. Wipe all moisture from your finger before inserting into the flexible thimble. If finger is injured or bleeding- use a different finger.



  • Where should I store the product?
    It is best to store the product in a cool place with ambient temperatures -20-55°C(-4°-131°F) and less than 95% humidity ( It is recommended that the product should be kept in a dry environment at all time. A humid ambient might affect PULOX2000 life span and even might damage the product.

  • How do I operate the device?
    1. Spread the clamp.
    2. Place one finger in the Oximeter (it is best to plug the finger thoroughly) then release the clamp.
    3. Press the switch button once on front panel.
    Note: PULOX2000 is equipped with a rechargeable lithium battery - make sure that the battery is charged before use.

  • When should I recharge the batteries?
    A warning light will appear on screen when batteries are to be recharged.

  • What is your return policy?
    30 days money back no questions asked.

  • What is your shipping method?
    Door to Door via international courier (EMS / Fed Ex / UPS).
    (Learn more about Pulse Oximetry)








    • Display
    Type
    LCD display
    4 display modes
    Parameters
    SpO2, PR, Pleth bar. Pleth waveform.
    Information
    Low Battery
    4 levels on brightness
    Patient Range
    Adult
    Pediatric
    SpO2
    Range
    35%-100%
    Resolution
    1%
    Accuracy
    70% to 100% ±2 digits
    0%-69%: unspecified
    Method
    Dual wavelength LED
    Heart (Pulse) Rate
    Range

    30-240 bpm

    Resolution
    1bpm Accuracy
    ±2bpm or ±2%
    Environmental
    Operating Temperature
    10°-40° (50°-104°F)
    Storage Temperature
    -20-55°C(-4°-131°F)
    Operating Humidity
    35%RH - 75%RH
    Storage Humidity
    less than 95%RH
    Classification
    Safety
    Class IIA (MDD93/42/EEC IX Rule 10)
    Mechanical
    Size
    57 x 32 x 30 mm
    Weight
    50g (including battery)
    Battery
    Type
    Lithium polymer rechargeable battery (by USB)
    Operation time
    minimum 12 hours for normal Operation


    2P-Oximeter PULOX2000 Pulse oximeter simple & quick spot checking of blood oxygen saturation and immediate pulse
    Home About us Product Buy Online F.A.Q Contact Us


    Israel gift basket | | Metal saw | Teclado Virtual | Hand held scanner | Pc-notetaker |
    Glass Oil Lamps | Washing Cups | Acu Hula Hoop | Restaurant Supply | Pulse Oximeter | Spy phone |
    Slim mouse | Resmed | Baby monitor | יערי אסף |